| f7bf4b8f-6c1d-421d-8d51-62d149b9fa37 |
ES 1221:2005
|
SPECIFICATION FOR UNPLASTICIZED POLYVINYL CHLORIDE (PVC-U) PRESSURE PIPES FOR COLD POTABLE WATER
|
MMMM yyyy
|
60.60
⇔ New
|
| aeee69bd-ecde-42be-8996-ab9203f2441d |
ES 1222:2005
|
PIPES OF RIGID PVC (RIGID POLYVINYL CHLORIDE) - DIMENSIONS
|
MMMM yyyy
|
60.60
⇔ New
|
| 57837080-ba05-45ef-945d-d9a80d65195e |
ES 2307:2006
|
PLASTICS PIPING SYSTEMS FOR THE TRANSPORT OF WATER INTENDED FOR HUMAN CONSUMPTION – MIGRATION ASSESSMENT PART 1. DETERMINATION OF MIGRATION VALUES OF PLASTICS PIPES
|
MMMM yyyy
|
60.60
⇔ New
|
| 42d85a32-cf86-4a5e-986d-c2b397430c86 |
ES 2564:2005
|
PLASTICS PIPING AND DUCTING SYSTEMS - POLYOLEFIN PIPES AND FITTINGSDETERMINATION OF OXIDATION INDUCTION TIME
|
MMMM yyyy
|
60.60
⇔ New
|
| 9ea105db-044b-4c74-a3b5-c3126f164c30 |
ES 2565:2005
|
PLASTICS PIPING AND DUCTING SYSTEMS THERMOPLASTICS PIPES AND FITTINGS DETERMINATION OF VICAT SOFTENING TEMPERATURE (VST)
|
MMMM yyyy
|
60.60
⇔ New
|
| aa16f7c8-68df-4ef5-a2b9-b9b2c0c87136 |
ES 2566:2005
|
PLASTICS PIPING AND DUCTING SYSTEMS THERMOPLASTICS PIPES TEST METHOD FOR RESISTANCE TO EXTERNAL BLOWS BY THE ROUND-THE CLOCK METHOD
|
MMMM yyyy
|
60.60
⇔ New
|
| d6c91440-ff5f-4582-94fa-ee57edec52af |
ES 2567:2005
|
PLASTICS PIPING AND DUCTING SYSTEMS PIPES AND FITTINGS OF UNPLASTICIZED POLY (VINYL CHLORIDE) (PVC-U) SPECIMEN PREPARATION FOR DETERMINATION OF THE
VISCOSITY NUMBER AND CALCULATION OF THE K-VALUE
|
MMMM yyyy
|
60.60
⇔ New
|
| 8a8cf2bb-efc0-4696-bc02-c1d0a3cf0af2 |
ES 2569:2005
|
PLASTICS PIPING AND DUCTING SYSTEMS THERMOPLASTICS PIPES DETERMINATION OF RESISTANCE TO EXTERNAL BLOWS BY THE STAIRCASE METHOD
|
MMMM yyyy
|
60.60
⇔ New
|
| 1468a816-8a4b-48a2-9caf-5eedaff8aaff |
ES 2570:2005
|
PLASTICS PIPING SYSTEMS UNPLASTICIZED POLY (VINYL CHLORIDE) (PVC-U) PIPES,FITTINGS AND MATERIAL) METHOD FOR ASSESSMENT OF THE PVC CONTENT BASED ON TOTAL CHLORINE CONTENT
|
MMMM yyyy
|
60.60
⇔ New
|
| 9f0b7f5b-17ce-472f-88a6-ccc8f9fd0189 |
ES 2604:2005
|
BLACK POLYETHYLENE PIPES UP TO NOMINAL SIZE 63 FOR ABOVE GROUND USE FOR COLD POTABLE WATER
|
MMMM yyyy
|
60.60
⇔ New
|
| 1c5f363f-5cad-4508-95d8-e6eda3b76648 |
ES 2636:2005
|
BLUE POLYETHYLENE PIPES UP TO NOMINAL SIZE 63 FOR BELOW GROUND USE FOR POTABLE WATER
|
MMMM yyyy
|
60.60
⇔ New
|
| 2f92f8d4-2e55-4768-adc1-4ca4ab62b7f7 |
ES 2658:2005
|
PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE POLYETHYLENE (PE) PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
|
MMMM yyyy
|
60.60
⇔ New
|
| dae3bffd-bcef-4b45-9d7b-64754e1e9186 |
ES 2665:2005
|
CODE OF PRACTICE FOR PLASTICS PIPEWORK (THERMOPLASTICS MATERIAL) PART 2. UNPLASTICIZED PVC PIPEWORK FOR THE CONVEYANCE OF LIQUIDS UNDER PRESSURE
|
MMMM yyyy
|
60.60
⇔ New
|
| 1df93515-cd1f-4a35-be39-d174c3b62c56 |
ES 2725:2005
|
PLASTICS PIPING SYSTEMS FOR BURIED AND ABOVE-GROUND PRESSURE SYSTEMS FOR WATER FOR GENERAL PURPOSES, DRAINAGE AND SEWERAGE POLYETHYLENE (PE) PART 2: PIPES
|
MMMM yyyy
|
60.60
⇔ New
|
| 600d00a7-867a-4885-8db2-b964021d8976 |
ES ISO 10467:2015
|
PLASTICS PIPING SYSTEMS FOR PRESSURE AND NON-PRESSURE DRAINAGE AND SEWERAGE — GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) SYSTEMS BASED ON UNSATURATED POLYESTER (UP) RESIN
|
MMMM yyyy
|
60.60
⇔ New
|
| 03aa562b-4bb2-44d4-a955-ff4f41d71241 |
ES ISO 10639:2015
|
PLASTICS PIPING SYSTEMS FOR PRESSURE AND NON-PRESSURE WATER SUPPLY — GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) SYSTEMS BASED ON UNSATURATED POLYESTER (UP) RESIN
|
MMMM yyyy
|
60.60
⇔ New
|
| cacff020-11e5-490b-92d5-94115e63fe86 |
ES ISO 11296-1:2015
|
PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS — PART 1: GENERAL
|
MMMM yyyy
|
60.60
⇔ New
|
| c2390222-56d3-4ce6-a6df-1e3e1f8e4adc |
ES ISO 11296-3:2015
|
PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS — PART 3: LINING WITH CLOSE-FIT PIPES
|
MMMM yyyy
|
60.60
⇔ New
|
| 99355852-89ab-4383-8cc7-48e79da4c970 |
ES ISO 11296-4:2015
|
PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS — PART 4: LINING WITH CURED-IN-PLACE PIPES
|
MMMM yyyy
|
60.60
⇔ New
|
| eaca35c8-69f8-4633-94be-1ae9eea04213 |
ES ISO 11296-7:2015
|
PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON.PRESSURE DRAINAGE AND SEWERAGE NETWORKS —PART.7:LINING WITH SPIRALLY.WOUND PIPES
|
MMMM yyyy
|
60.60
⇔ New
|
| f4c3b6c9-8804-4733-b58a-921bd5e0ae1d |
ES ISO 11297-1:2015
|
PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND DRAINAGE AND SEWERAGE NETWORKS UNDER PRESSURE —PART 1: GENERAL
|
MMMM yyyy
|
60.60
⇔ New
|
| e85ea21e-733f-496c-86f9-b31b6eeef576 |
ES ISO 11297-3:2015
|
PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND DRAINAGE AND SEWERAGE NETWORKS UNDER PRESSURE —PART 3: LINING WITH CLOSE-FIT PIPES
|
MMMM yyyy
|
60.60
⇔ New
|
| 6ee5d878-2c68-47f4-bedb-1e7547c13a48 |
ES ISO 11298-1:2015
|
PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS — PART 1: GENERAL
|
MMMM yyyy
|
60.60
⇔ New
|
| e2dfa453-4ea1-4526-b399-d005d5b0b152 |
ES ISO 11298-3:2015
|
PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS — PART 3: LINING WITH CLOSE-FIT PIPES
|
MMMM yyyy
|
60.60
⇔ New
|
| d824d0c0-71e2-4ad9-82ae-45f27799fc04 |
ES ISO 11922-1:2022
|
THERMOPLASTIC PIPES FOR THE CONVEYANCE OF FLUIDS – DIMENSION AND TOLERANCES PART 1: METRIC SERIES
|
MMMM yyyy
|
60.60
⇔ Systematic Review
|
| 537ea514-e1a4-46ce-9a88-d870bda151a3 |
ES ISO 12176-1:2015
|
PLASTICS PIPES AND FITTING — EQUIPMENT FOR FUSION JOINTING POLYETHYLENE SYSTEMS —PART 1: BUTT FUSION
|
MMMM yyyy
|
60.60
⇔ New
|
| f77c1530-4f78-4fe9-9635-d4b871cc1ffa |
ES ISO 12176-3:2015
|
PLASTICS PIPES AND FITTINGS – EQUIPMENT FOR FUSION JOINTING POLYETHYLENE SYSTEMS – PART 3: OPERATOR’S BADGE
|
MMMM yyyy
|
60.60
⇔ Systematic Review
|
| 7717cb1a-aa8b-4251-8753-187b0d13649e |
ES ISO 13262:2015
|
THERMOPLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE THERMOPLASTICS SPIRALLY-FORMED STRUCTURED-WALL PIPES — DETERMINATION OF THE TENSILE STRENGTH OF A SEAM
|
MMMM yyyy
|
60.60
⇔ New
|
| c65cc0cf-cfdc-4092-987e-98ae8acceccc |
ES ISO 13263:2015
|
THERMOPLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE THERMOPLASTICS FITTINGS — TEST METHOD FOR IMPACT STRENGTH
|
MMMM yyyy
|
60.60
⇔ New
|
| 686d9070-f525-4470-ae6e-1ac75ffdb142 |
ES ISO 13264:2015
|
THERMOPLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE THERMOPLASTICS FITTINGS — TEST METHOD FOR MECHANICAL STRENGTH OR FLEXIBILITY OF ABRICATED FITTINGS
|
MMMM yyyy
|
60.60
⇔ New
|
| 55cb0755-3656-4517-9aaa-4183b7a4055d |
ES ISO 13265:2015
|
THERMOPLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE JOINTS FOR BURIED NON-PRESSURE APPLICATIONS — TEST METHOD FOR THE LONG-TERM SEALING PERFORMANCE OF JOINTS WITH ELASTOMERIC SEALS BY ESTIMATING THE SEALING PRESSURE
|
MMMM yyyy
|
60.60
⇔ New
|
| 621e3cdc-87fd-44ba-906b-4637a9e562f7 |
ES ISO 13266:2015
|
THERMOPLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE — THERMOPLASTICS SHAFTS OR RISERS FOR INSPECTION CHAMBERS AND MANHOLES — DETERMINATION OF RESISTANCE AGAINST SURFACE AND TRAFFIC LOADING
|
MMMM yyyy
|
60.60
⇔ New
|
| 9ce173af-48bd-4669-b920-ecbf5a00c713 |
ES ISO 13267:2015
|
THERMOPLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE THERMOPLASTICS INSPECTION CHAMBER AND MANHOLE BASES — TEST METHODS FOR BUCKLING RESISTANCE
|
MMMM yyyy
|
60.60
⇔ New
|
| 86827698-0f25-4c13-8be8-43cc6a5a65d1 |
ES ISO 13477:2015
|
THERMOPLASTIC PIPES FOR THE CONVEYANCE OF FLUIDS DETERMINATION OF RESISTANCE TO RAPID CRACKING PROPAGATION (RCP) - SMALL-SCALE-STEADY-STATE TEST (S4 TEST)
|
MMMM yyyy
|
60.60
⇔ New
|
| 94656b64-8caf-44cb-8cf6-dc9d975f06b7 |
ES ISO 13478:2015
|
THERMOPLASTICS PIPES FOR THE CONVEYANCE OF FLUIDS – DETERMINATION OF RESISTANCE TO RAPID CRACK PROPAGATION (RCP)-FULL-SCALE TEST (FST)
|
MMMM yyyy
|
60.60
⇔ Systematic Review
|
| 91b865ed-48a3-4ef8-a180-dfca5e7382c9 |
ES ISO 13479:2015
|
POLYOLEFIN PIPES FOR THE CONVEYANCE OF FLUIDS – DETERMINATION OF RESISTANCE TO CRACK PROPAGATION – TEST METHOD FOR SLOW CRACK GROWTH ON NOTCHED PIPE (NOTCH TEST)
|
MMMM yyyy
|
60.60
⇔ Systematic Review
|
| 56c204b3-7b5c-4450-a84f-13c69f5e6a31 |
ES ISO 1452-1:2005
|
PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE — UNPLASTICIZED POLY (VINYL CHLORIDE) (PVC-U) — PART 1: GENERAL
|
MMMM yyyy
|
60.60
⇔ New
|
| dd42aabb-00ce-4517-b4e2-c6864f86c3cd |
ES ISO 1452-2:2007
|
PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE — UNPLASTICIZED POLY (VINYL CHLORIDE) (PVC-U) — PART 2: PIPES
|
MMMM yyyy
|
60.60
⇔ New
|
| 98890cd7-ef2b-498a-b525-557552efb6d9 |
ES ISO 1452-5:2007
|
PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE — UNPLASTICIZED POLY (VINYL CHLORIDE) (PVC-U) — PART 5: FITNESS FOR PURPOSE OF THE SYSTEM
|
MMMM yyyy
|
60.60
⇔ New
|
| d20c71f7-c167-41d4-a3e7-9128d0508f7e |
ES ISO 161-1:2013
|
THERMOPLASTICS PIPES FOR THE CONVEYANCE OF FLUIDS NOMINAL OUTSIDE DIAMETERS AND NOMINAL PRESSURES PART 1: METRIC SERIES
|
MMMM yyyy
|
60.60
⇔ New
|
| 17f99523-b728-495b-835a-ef0f5ceea4c3 |
ES ISO 161-2:2005
|
THERMOPLASTICS PIPES FOR THE CONVEYANCE OF FLUIDS NOMINAL OUTSIDE DIAMETERS AND NOMINAL PRESSURES PART 2: INCH-BASED SERIES
|
MMMM yyyy
|
60.60
⇔ New
|
| 36bea478-3000-445d-95c4-31da643f034e |
ES ISO 18373-1:2007
|
RIGID PVC PIPES— DIFFERENTIAL SCANNING CALORIMETRY (DSC) METHOD—PART1:MEASUREMENT OF THE PROCESSING TEMPERATURE
|
MMMM yyyy
|
60.60
⇔ New
|
| 9475c0df-81f2-4b22-ba21-fa18fc8f0c99 |
ES ISO 18373-2:2008
|
RIGID PVC PIPES— DIFFERENTIAL SCANNING CALORIMETRY (DSC) METHOD—PART2:MEASUREMENT OF THE ENTHALPY OF FUSION OF CRYSTALLITE
|
MMMM yyyy
|
60.60
⇔ New
|
| 3c6fd7e7-a6d2-46b7-ad3f-8f6de559b3fb |
ES ISO 18672-1:2015
|
PLASTICS PIPING SYSTEMS FOR NON-PRESSURE DRAINAGE AND SEWERAGE — POLYESTER RESIN CONCRETE (PRC) — PART 1: PIPES AND FITTINGS WITH FLEXIBLE JOINTS
|
MMMM yyyy
|
60.60
⇔ New
|
| 5f7c3668-c9bc-49f1-a4a3-2da4ddcd7eb6 |
ES ISO 21004:2015
|
PLASTICS PIPING SYSTEMS — MULTILAYER PIPES AND THEIR JOINTS, BASED ON THERMOPLASTICS, FOR WATER SUPPLY
|
MMMM yyyy
|
60.60
⇔ New
|
| 626be886-bf36-4798-b7be-2d2ad9a3171b |
ES ISO 21307:2015
|
PLASTICS PIPES AND FITTINGS — BUTT FUSION JOINTING PROCEDURES FOR POLYETHYLENE (PE) PIPES AND FITTINGS USED IN THE CONSTRUCTION OF GAS AND WATER DISTRIBUTION SYSTEMS
|
MMMM yyyy
|
60.60
⇔ New
|
| b41f1aff-6494-4a47-82ff-d3a292a883f4 |
ES ISO 22391-1:2015
|
PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS — POLYETHYLENE OF RAISEDTEMPERATURE RESISTANCE (PE-RT) — PART 1: GENERAL
|
MMMM yyyy
|
60.60
⇔ New
|
| 493b23fe-8600-443f-92d5-547a9f7893aa |
ES ISO 22391-2:2015
|
PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS — POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT) — PART 2: PIPES
|
MMMM yyyy
|
60.60
⇔ New
|
| bf5343aa-35d8-4630-a6f3-1754bb94cb4b |
ES ISO 22391-3:2015
|
PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS — POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT) — PART 3: FITTINGS
|
MMMM yyyy
|
60.60
⇔ New
|
| 8497561c-3d43-40ed-b0c6-230289d92456 |
ES ISO 2503:2009
|
GAS WELDING EQUIPMENT — PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW-METERING DEVICES FOR GAS CYLINDERS USED IN WELDING, CUTTING AND ALLIED PROCESSES UP TO 300 BAR (30 MPA)
|
MMMM yyyy
|
60.60
⇔ New
|
| fc7463eb-a914-4082-8e69-7c6dd0e9f2ea |
ES ISO 2505:2005
|
THERMOPLASTICS PIPES — LONGITUDINAL REVERSION — PART 2: DETERMINATION METHODS
|
MMMM yyyy
|
60.60
⇔ New
|
| 9f9654d5-b8ac-4ecd-b8e8-b8fd4169b219 |
ES ISO 2507-1:2005
|
THERMOPLASTICS PIPES AND FITTINGS – VICAT SOFTENING TEMPERATURE – PART 1: GENERAL TEST METHOD
|
MMMM yyyy
|
60.60
⇔ New
|
| 44e51d33-20de-4f02-9415-9bd0e3ed7775 |
ES ISO 2507-2:2005
|
CONDITIONS FOR UNPLASTICIZED POLY (VINYLCHLORIDE) (PVC-U) OR CHLORINATED POLY (VINYL CHLORIDE) (PVC-C) PIPES AND FITTINGS AND FOR HIGH IMPACT RESISTANCE POLY(VINYL CHLORIDE) (PVC-HI) PIPES
|
MMMM yyyy
|
60.60
⇔ New
|
| 948b2864-66fa-4cab-9724-86217d5fff70 |
ES ISO 2507-3:2005
|
THERMOPLASTICS PIPES AND FITTINGS - VICAT SOFTENING TEMPERATURE PART 3: TEST CONDITIONS FOR ACRYLONITRILE/ BUTADIENE STYRENE (ABS) AND ACRYLONITRILE
/STYRENE/ ACRYLIC ESTER (ASA) PIPES AND FITTINGS
|
MMMM yyyy
|
60.60
⇔ New
|
| 654fbe09-2c3b-4353-8ae1-a53580f3c72a |
ES ISO 265-1:2005
|
PIPES AND FITTINGS OF PLASTIC MATERIALS – FITTINGS FOR DOMESTIC AND INDUSTRIAL –WASTE PIPES – BASIC DIMENSIONS: METRIC SERIES PART 1: UNPLASTICIZED POLY (VINYL
CHLORIDE) (PVC-U)
|
MMMM yyyy
|
60.60
⇔ New
|
| ad0cbd61-4cf1-4618-907c-fd5f2c528032 |
ES ISO 3114:2005
|
UNPLASTICIZED POLYVINYL CHLORIDE (PVC-U) PIPES FOR POTABLE WATER SUPPLY – EXTRACTABILITY OF LEAD AND TIN- TEST METHOD
|
MMMM yyyy
|
60.60
⇔ New
|
| 681e9b9f-8ad6-4a54-9165-65821be4e3a1 |
ES ISO 3126:2022
|
PLASTICS PIPES – MEASUREMENT OF DIMENSIONS
|
MMMM yyyy
|
60.60
⇔ Systematic Review
|
| 7b0d4ce4-1922-465b-9208-ccccf87434a6 |
ES ISO 3127:2005
|
THERMOPLASTICS PIPES – DETERMINATION OF RESISTANCE TO EXTERNAL BLOWS –ROUND – THE – CLOCK METHOD
|
MMMM yyyy
|
60.60
⇔ New
|
| 40016522-040e-45e9-a208-0c4a385a2624 |
ES ISO 3633:2005
|
PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) INSIDE BUILDING- UNPLASTICIZED POLY (VINYL CHLORIDE) (PVC-U)
|
MMMM yyyy
|
60.60
⇔ New
|
| 0f2c2fab-948e-4030-9095-b8667342e5b7 |
ES ISO 4191:2015
|
UNPLASTICIZED POLYVINYL CHLORIDE (PVC-U) PIPES FOR WATER SUPPLY – RECOMMENDED PRACTICE FOR LAYING
|
MMMM yyyy
|
60.60
⇔ New
|
| 1470b528-9b54-4821-a8e0-51b6dbb91165 |
ES ISO 4427-1:2007
|
PLASTICS PIPING SYSTEMS — POLYETHYLENE (PE) PIPES AND FITTINGS FOR WATER SUPPLY — PART 1: GENERAL
|
MMMM yyyy
|
60.60
⇔ New
|
| f47a0a50-d5df-450d-93a3-9442b17b518f |
ES ISO 4427-2:2007
|
PLASTICS PIPING SYSTEMS — POLYETHYLENE (PE) PIPES AND FITTINGS FOR WATER SUPPLY — PART 2: PIPES
|
MMMM yyyy
|
60.60
⇔ New
|
| 1b546a10-a654-40d6-8e21-b738ec1add03 |
ES ISO 4427-5:2007
|
PLASTICS PIPING SYSTEMS — POLYETHYLENE (PE) PIPES AND FITTINGS FOR WATER SUPPLY — PART 5: FITNESS FOR PURPOSE OF THE SYSTEM
|
MMMM yyyy
|
60.60
⇔ New
|
| 6c9d2daa-818d-4a02-a15c-06d2e0597c17 |
ES ISO 4435:2005
|
PLASTICS PIPING SYSTEMS FOR NON-PRESCRIBE UNDERGROUND DRAINAGE AND SEWERAGE – UNPLASTICIZED POLY (VINYL CHLORIDE) (PVC-U)
|
MMMM yyyy
|
60.60
⇔ New
|
| 0a5f72ca-9558-4eee-8b40-94edebdbee05 |
ES ISO 4440-1:2005
|
THERMOPLASTICS PIPES AND FITTINGS DETERMINATION OF MELT MASS-FLOW RATE PART 1: TEST METHOD
|
MMMM yyyy
|
60.60
⇔ New
|
| f89ac181-bef2-40d7-beeb-676bac60d236 |
ES ISO 4440-2:2005
|
THERMOPLASTICS PIPES AND FITTINGS DETERMINATION OF MELT MASS-FLOW RATE PART 2: TEST CONDITIONS
|
MMMM yyyy
|
60.60
⇔ New
|
| a21d18d1-e850-4942-822d-ddafbc09e84c |
ES ISO 6259-1:2005
|
THERMOPLASTICS PIPES – DETERMINATION OF TENSILE PROPERTIES PART 1: GENERAL TEST METHOD
|
MMMM yyyy
|
60.60
⇔ New
|
| f5ced321-c373-43a8-9b0d-e19297b93ce0 |
ES ISO 6259-2:2005
|
THERMOPLASTICS PIPES – DETERMINATION OF TENSILE PROPERTIES PART 2: PIPES MADE OF UNPLASTICIZED POLY (VINYLCHLORIDE) (PVC-U) OR CHLORINATED POLY(VINYL
CHLORIDE) (PVC-C) PIPES AND FITTINGS AND FOR HIGH IMPACT RESISTANCE POLY (VINYL CHLORIDE) (PVC-HI)
|
MMMM yyyy
|
60.60
⇔ New
|
| 9d7f7cda-1c3d-4ce8-af0d-c7949c5f1d28 |
ES ISO 6259-3:2005
|
THERMOPLASTICS PIPES – DETERMINATION OF TENSILE PROPERTIES PART 3 POLYOLEFIN PIPES
|
MMMM yyyy
|
60.60
⇔ New
|
| 5ce14ed0-ff16-4d0e-aaaf-e2f03c98b494 |
ES ISO 6964:2005
|
POLYOLEFIN PIPES AND FITTINGS – DETERMINATION OF CARBON BLACK CONTENT BY CALCINATIONS AND PYROLYSIS – TEST METHOD AND BASIC SPECIFICATION
|
MMMM yyyy
|
60.60
⇔ New
|
| 79e90226-ae13-4d9b-9597-9d7404177a93 |
ES ISO 7245:2005
|
PIPES AND FITTING OF ACRYLONITRILE – BUTADIENE – STYRENE (ABS) – GENERAL SPECIFICATION FOR MOULDING AND EXTRUSION MATERIALS
|
MMMM yyyy
|
60.60
⇔ New
|
| c757d96e-3e17-4c54-b572-53655c157b8b |
ES ISO 7246:2005
|
PIPES AND FITTINGS OF ACRYLONITRILE/ STYRENE/ACRYLESTER (ASA) – GENERAL SPECIFICATION FOR MOLDING AND EXTRUSION MATERIALS
|
MMMM yyyy
|
60.60
⇔ New
|
| 1b731130-5117-42d5-93e3-9aea6c8e408e |
ES ISO 7671:2005
|
PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) INSIDE BUILDINGS – POLYPROPYLENE (PP)
|
MMMM yyyy
|
60.60
⇔ New
|
| f809f2f0-8e74-4f12-a4c3-4d6acfa4eb5f |
ES ISO 7682:2005
|
PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) INSIDE BUILDINGS – ACRYLONITRILE-BUTADIENE-STYRENE (ABS)
|
MMMM yyyy
|
60.60
⇔ New
|
| 231d367e-5c6e-42e7-8a59-c469def6c3fb |
ES ISO 8283-4:2005
|
PLASTICS PIPES AND FITTINGS – DIMENSIONS OF SOCKETS AND SPIGOTS FOR DISCHARGE SYSTEMS INSIDE BUILDINGS – PART 4: ACRYLONITRILE/BUTADIENE/STYRENE (ABS)
|
MMMM yyyy
|
60.60
⇔ New
|
| 24e6c126-6fd4-4d30-91f7-f0b93cb1321e |
ES ISO 8361-1:2015
|
THERMOPLASTICS PIPES AND FITTINGS WATER ABSORPTION PART 1: GENERAL TEST METHOD
|
MMMM yyyy
|
60.60
⇔ New
|
| 802b230f-698b-4532-a3e5-9ac8a1850d3d |
ES ISO 8361-2:2015
|
THERMOPLASTICS PIPES AND FITTINGS WATER ABSORPTION PART 2: TEST CONDITIONS FOR UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PIPES AND FITTINGS
|
MMMM yyyy
|
60.60
⇔ New
|
| 7ec247b8-f29d-48ce-bfe1-ee598a1f9526 |
ES ISO 8361-3:2015
|
THERMOPLASTICS PIPES AND FITTINGS -- WATER ABSORPTION -- PART 3: TEST CONDITIONS FOR ACRYLONITRILE/
|
MMMM yyyy
|
60.60
⇔ New
|
| 32744593-429f-430a-bf23-4da1a69fb358 |
ES ISO 8772:2015
|
PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE — POLYETHYLENE (PE)
|
MMMM yyyy
|
60.60
⇔ New
|
| a23f9b95-957b-42e5-899b-b254d5c48e3d |
ES ISO 8773:2015
|
PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE — POLYPROPYLENE (PP)
|
MMMM yyyy
|
60.60
⇔ New
|
| fd5259b1-f8ff-438b-b65d-29555cddcddd |
ES ISO 9080:2015
|
PLASTICS PIPING AND DUCTING SYSTEMS - DETERMINATION OF THE LONG - TERM HYDROSTATIC STRENGTH OF THERMOPLASTICS MATERIALS IN PIPE FORM BY EXTRAPOLATION
|
MMMM yyyy
|
60.60
⇔ New
|
| e2405fde-b2c8-4fa8-a773-826d7cb88a15 |
ES ISO 9852:2015
|
UNPLASTICIZED POLY (VINYL CHLORIDE) (PVC-U) PIPES – DICHLOROMETHANE RESISTANCE AT SPECIFIED TEMPERATURE (DCMT) – TEST METHOD
|
MMMM yyyy
|
60.60
⇔ New
|
| b3e1df29-5e79-4191-b989-abcac1b4e41f |
ES ISO 9969:2015
|
THERMOPLASTIC PIPES – DETERMATION OF RING STIFFNESS
|
MMMM yyyy
|
60.60
⇔ New
|