| 901fe67e-fe92-43ab-affa-542ce8ffface |
ES 2562:2005
|
PLASTICS PIPING AND DUCTING SYSTEMS- INJECTION MOULDED THERMOPLASTICS FITTINGS TEST METHOD FOR VISUALLY ASSESSING EFFECTS OF HEATING
|
MMMM yyyy
|
60.60
⇔ New
|
| 66adebe4-a688-4c6b-a7b2-7e00735eac01 |
ES 2618:2005
|
JOINTING MATERIALS AND COMPOUNDS PART 1: SPECIFICATION FOR CORRUGATED METAL JOINT RINGS
|
MMMM yyyy
|
60.60
⇔ New
|
| 418ede57-efeb-4d06-86d4-453844263984 |
ES 2696:2005
|
PRECAST CONCRETE PIPES, FITTINGS AND ANCILLARY PRODUCTS. SPECIFICATION FOR OGEE PIPES AND FITTINGS (INCLUDING PERFORATED)
|
MMMM yyyy
|
60.60
⇔ New
|
| 9aee16cd-f3f7-4908-9810-be194ac28fa6 |
ES 2951:2006
|
PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - ACRYLONITRILEBUTADIENE- STYRENE (ABS) PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
|
MMMM yyyy
|
60.60
⇔ New
|
| 5ae8842d-0df8-4ff0-aca9-261e54c53d1d |
ES ISO 11413:2015
|
PLASTICS PIPES AND FITTINGS – PREPARATION OF TEST PIECES ASSEMBLIES BETWEEN A POLYETHYLENE (PE) PIPE AND AN ELECTROFUSION FITTING
|
MMMM yyyy
|
60.60
⇔ New
|
| a1306af0-419d-47b3-a2b9-19f5c5937709 |
ES ISO 11414:2015
|
PLASTIC PIPES AND FITTINGS – PREPARATION OF POLYETHYLENE (PE) PIPE/PIPE OR PIPE/FITTING TEST PIECE ASSEMBLIES BY BUTT FUSION
|
MMMM yyyy
|
60.60
⇔ New
|
| 97f9a5cb-ca04-4a30-bbd5-65f0ba2bf57b |
ES ISO 12151-1:2015
|
CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 1: HOSE FITTINGS WITH ISO 8434-3 O-RING FACE SEAL ENDS
|
MMMM yyyy
|
60.60
⇔ New
|
| 6969a62c-dd9f-4418-b09c-86d7fbd785dc |
ES ISO 13260:2015
|
THERMOPLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE TEST METHOD FOR RESISTANCE TO COMBINED TEMPERATURE CYCLING AND EXTERNAL LOADING
|
MMMM yyyy
|
60.60
⇔ New
|
| 1b6ae615-98f6-4471-9e3f-a186ffe3af29 |
ES ISO 13268:2015
|
THERMOPLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE THERMOPLASTICS SHAFTS OR RISERS FOR INSPECTION CHAMBERS AND MANHOLES DETERMINATION OF RING STIFFNESS
|
MMMM yyyy
|
60.60
⇔ New
|
| 358a0f65-526c-4804-ab92-a3bb754767c1 |
ES ISO 13846:2005
|
PLASTICS PIPING SYSTEMS – END-LOAD-BEARING AND NON-END-LOAD BEARING ASSEMBLIES AND JOINTS FOR THERMOPLASTICS PRESSURE PIPING – TEST METHOD FOR LONG-TERM LEAK TIGHTNESS UNDER INTERNAL WATER PRESSURE
|
MMMM yyyy
|
60.60
⇔ New
|
| 097a09fe-3ccf-4715-b5aa-3f1d7be37909 |
ES ISO 13953:2005
|
PLASTIC PIPES AND FITTINGS – PEEL DECOHESION TEST FOR POLYETHYLENE (PE)ELECTROFUSION ASSEMBLIES OF NOMINAL OUTSIDE DIAMETER GREATER THAN OR EQUAL TO 90 MM
|
MMMM yyyy
|
60.60
⇔ New
|
| 12250a4a-75a5-4493-ab4c-d5d0a7606ef0 |
ES ISO 13954:2005
|
PLASTIC PIPES AND FITTINGS – PEEL DECOHESION TEST FOR POLYETHYLENE (PE) ELECTROFUSION ASSEMBLIES OF NOMINAL OUTSIDE DIAMETER GREATER THAN OR EQUAL TO 90 MM
|
MMMM yyyy
|
60.60
⇔ New
|
| 8b6ff7b5-3bf6-4d23-aed9-c3a161311af1 |
ES ISO 13955:2005
|
PLASTICS PIPES AND FITTINGS – CRUSHING DECHESION TEST FOR POLYETHYLENE (PE) ELECTROFUSION ASSEMBLIES
|
MMMM yyyy
|
60.60
⇔ New
|
| c8da4905-f2ad-4ff7-9d02-b089ea86c5c6 |
ES ISO 2536:2005
|
UNPLASTICIZED POLYVINYL CHLORIDE (PVC-U) PRESSURE PIPES AND FITTINGS, METRIC SERIES DIMENSIONS OF FLANGES
|
MMMM yyyy
|
60.60
⇔ New
|
| d248d6af-eeba-421c-ad87-9e8abb0e05dc |
ES ISO 4427-3:2007
|
PLASTICS PIPING SYSTEMS — POLYETHYLENE (PE) PIPES AND FITTINGS FOR WATER SUPPLY —PART 3: FITTINGS
|
MMMM yyyy
|
60.60
⇔ New
|
| 6aad478b-3fd5-45b6-bb5d-8b29b9dc65e5 |
ES ISO 4434:2005
|
UNPLASTICIZED POLY VINYL CHLORIDE (PVC) ADAPTOR FITTINGS FOR JPIPES UNDER PRESSURE – LAYING LENGTH AND SIZE OF THREADS – METRIC SE RIES
|
MMMM yyyy
|
60.60
⇔ New
|
| 5433ad25-06db-4ac0-9955-6e01e8e22621 |
ES ISO 580:2005
|
INJECTION-MOULDED UNPLASTICIED POLY (VINYL CHLORIDE) (PVC-U) FITTINGS – OVEN TEST – TEST METHOD AND BASIC SPECIFICATIONS
|
MMMM yyyy
|
60.60
⇔ New
|
| 981cacde-b89d-4157-97e1-5ed9db2a0325 |
ES ISO 7005-1:2015
|
METALLIC FLANGES - PART 1: STEEL FLANGES
|
MMMM yyyy
|
60.60
⇔ New
|
| 26c88cc4-1b6d-408f-a214-05c1a93f3737 |
ES ISO 7005-2:2005
|
METALLIC FLANGES - PART 2: CAST IRON FLANGES
|
MMMM yyyy
|
60.60
⇔ New
|
| d586064f-aa4e-4ef2-a4b6-f0e1448768b1 |
ES ISO 727-1:2005
|
FITTING MADE FROM UNPLASTICIZED POLY (VINYL CHLORIDE) (PVC-U) CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) OR ACRYLONITRILE/BUTADIENE/STYRENE (ABS) WITH PLAN SOCKETS FOR PIPES UNDER PRESSURE – PART 1: METRIC SERIES
|
MMMM yyyy
|
60.60
⇔ New
|
| c5cdf3fc-5a72-43b4-a473-2255acaeea28 |
ES ISO 8283-1:2005
|
PLASTICS PIPES AND FITTINGS – DIMENSIONS OF SOCKETS AND SPIGOTS FOR DISCHARGE SYSTEMS INSIDE BUILDINGS PART 1: UNPLASTICIZED POLY (VINYL CHLORIDE) (PVC-U) AND CHLORINATED POLY (VINYL CHLORIDE) (PVC-C)
|
MMMM yyyy
|
60.60
⇔ New
|
| 6dfba9c4-5209-4d5f-9bc2-f3af7cdda950 |
ES ISO 8283-2:2005
|
PLASTICS PIPES AND FITTINGS – DIMENSIONS OF SOCKETS AND SPIGOTS FOR DISCHARGE SYSTEMS INSIDE BUILDINGS- PART F2: POLYETHYLENE (PE)
|
MMMM yyyy
|
60.60
⇔ New
|
| 4bd2dd6e-ed8a-4cca-94d3-41edf91f8510 |
ES ISO 8283-3:2005
|
PLASTIC PIPES AND FITTINGS – DIMENSIONS OF SOCKETS AND SPIGOTS FOR DISCHARGE SYSTEMS INSIDE BUILDINGS – PART 3: POLYPROPYLENE (PP)
|
MMMM yyyy
|
60.60
⇔ New
|
| 06e5aa42-3878-4a85-930d-5747b4085da9 |
ES ISO 9853:2005
|
INJECTION-MOULALED UNPLASTICIZED POLY (VINYL CHLORIDE) PCV-U) FITTINGS FOR PRESSURE PIPE SYSTEMS – CRUSHING TEST
|
MMMM yyyy
|
60.60
⇔ New
|